Flat Pack MatesCabinet and flat pack furniture assembly in Kensington
We assemble cabinets, bookcases and other flat pack furniture in Kensington. If a unit goes into an alcove or beside a fireplace, show us the available width, depth and room for doors to open.
Postcode districts W8
- Kensington W8 appointments
- Cabinets, bookcases and storage
- Send the alcove measurements
Do you assemble cabinets and bookcases in Kensington W8?
Yes. We assemble freestanding flat pack cabinets, bookcases and storage in Kensington. Send the model, full postcode and the intended room. For an alcove, give the narrowest width and the depth near any trim, and tell us whether the cartons can reach the room through the approved entrance.
What if a cabinet will cover an outlet in the alcove?
Mark the outlet on your room plan and say how often it needs to be used. Include the cabinet depth and a picture of its back if available. We can discuss an accessible position and check the model’s instructions. Arrange electrical changes separately with a qualified tradesperson.
Send the access instructions for the actual property
Tell us which floor or level the room is on. If an address has front steps or a lower-ground entrance, identify the approved route for carrying cartons. Measure the narrowest turn and the door opening against the supplier’s largest box. If there is a porter, check whether visitors must register before using the entrance.
Check which entrance the resident can use for larger items and whether there are times when the route must stay clear. Give the carrying distance from unloading to the room. If boxes are already delivered, label them by room and tell us which side of the property they are on.
Measure the opening at each turn rather than using the outside dimensions of the doorway. A tall side panel may be difficult to tilt if there is a light or a low landing. Keep the supplier’s labels and boxed dimensions to hand. Ask whether a service lift can be booked if that is the approved route.
Check the cabinet against the room before filling the shelves
Agree the position before the larger panels go together
We check the assembly instructions and the agreed room arrangement. If the furniture has adjustable shelves or doors that can be handed, confirm the choices before the build. When a model requires a wall fixing, we need a suitable wall and permission to use it. Ask about any known restrictions before the day.
Try the moving parts with the cabinet in place
At handover, open each door and drawer and check the gaps beside the alcove. Look at the outlet and any control you asked us to leave accessible. Keep the instructions and unused supplied fittings together. If a replacement is needed, note the part number before the boxes are removed.
| Before loading | Check in the intended position |
|---|---|
| Cabinet doors | Open past the hearth, trim and handles |
| Adjustable shelves | Spacing matches the intended contents |
| Outlet or panel | Still reachable as agreed |
Prepare the Kensington alcove and check the building entrance
- Measure both sides of the opening at more than one height.
- Send the cabinet model and door arrangement.
- Check the route for full-length panels.
- Confirm the wall fixing permission if needed.
| Share before booking | What it helps us check |
|---|---|
| Alcove measurements | Width, trim and clearance for doors |
| Cabinet model | Panel size, door movement and fixing instructions |
| Entrance details | Turns, steps and sign-in procedure |
Measure a fireplace alcove where the cabinet actually sits
Measure between the walls at floor level and higher up, including any skirting or trim. Give the depth from the back wall to the nearest projection. Check whether the cabinet doors open without hitting the fireplace surround or wall. A freestanding unit may need a gap to let its doors and handles move freely.
When measuring a recess, compare both sides near the front and back of the intended unit. An older opening can narrow towards one corner. Check the height of skirting and whether the cabinet feet stand within it. If the doors sit flush with the frame, confirm how far the handles project when the doors open.
If two cabinets flank a fireplace, measure the alcoves separately. Show us whether you want their front edges in line, and tell us if one side has less depth or an outlet. The retailer’s drawings can show clearance for moving parts. Send the exact door type, since a different hinge can change where the door swings.
Request a Kensington cabinet estimate with the measurements
Assembly is charged by time and by fitter. The size of the units, number of doors, access route and any agreed dismantling affect the estimate. Give us the exact furniture list and let us know whether cartons are already in the room. Include parking and any sign-in arrangements, especially where unloading is limited to a booked period.
See assembly prices and IKEA furniture assembly. If you need the cartons brought to the property, ask about collection and delivery.
Discuss fixing and alterations before ordering
Share the furniture model and the instruction page for any wall restraint. Let us know the wall type if you know it and whether drilling is permitted. If an outlet or inspection panel lies behind the furniture, mark it on your sketch. Discuss alterations, fitted cabinetry or cutting around trim as separate work before booking.
Leave the alcove and surrounding floor clear before the appointment. Remove ornaments from shelves and move furniture away from the working area. If an existing cabinet is to be dismantled and kept, agree where to put its panels and label its fasteners separately from the new set.
Make sure the person approving the furniture position is available when we start. If a wall fixing is required, tell us about permission, any known pipes or cables and the wall surface. If the planned position does not suit the instructions, we can discuss the options before putting the cabinet into use.
Before you book in Kensington
Can you put a freestanding cabinet into my Kensington alcove?
Send the model, width and depth at several heights, plus a photo. We can discuss access to the doors and any wall restraint the model needs.
Can the fitter use the lower-ground entrance at my Kensington address?
Give the approved route, stairs and clear door width. Tell us where the cartons are and who can admit the fitter at that entrance.
Can you cut the cabinet back to clear my Kensington skirting?
Send photos and the instructions first. Cutting or built-in alterations need separate discussion because they can affect the structure and fixing requirements.
Should I wait for the Kensington cabinet doors before booking?
Send the full order and identify what has arrived. We can discuss whether another complete item is ready or whether the cabinet should wait for its doors.
Request furniture assembly in Kensington
Send the postcode, item list and access notes. We can confirm availability and what the appointment would involve.
Photographs illustrate typical assembly work.