Furniture assembly in Harringay

A room sketch should show the furniture with its doors and drawers open, not only the closed dimensions. Check the access to an adjacent cupboard, a window control and the room door. If a tall shelf is beside a desk, measure how far the chair moves. Send the shelf and desk models separately so the fittings and quantities are clear.

For a long cabinet, measure the path into the room as well as the wall where it is going. Check turns in the corridor and the door opening with any stop or handle taken into account. The assembled piece may be too wide to move between rooms. Tell us where the retailer will leave its packs and where you can provide a clear surface for the build.

If a bookcase is also going in, decide whether it needs to be built first to leave room for its panels. If an older unit has to be dismantled, list it separately and explain whether you intend to reassemble it elsewhere. Empty the shelves and keep old hardware with the matching pieces rather than mixing it with the new fittings.

Draw the furniture footprint and mark the wall sockets, aerial points and switches you still need. If a media unit has a fixed back, check the position of its openings. A socket can protrude beyond the back of a cabinet and affect how close it stands to the wall. Tell us if equipment needs an open path for ventilation or if the manual specifies clearance.

Plan the connection route before building the unit. The fitter needs to know which parts of the wall must stay accessible and whether the unit is expected to sit clear of a projecting plug or skirting. Check the manufacturer’s guidance for electronic equipment. Move the television and equipment to a safe place until the cabinet is ready and tell us about anything that needs to be removed first.

A cabinet may come with more than one option for its internal layout. Mark which side takes drawers and where you want shelving, then compare the finished openings with what you plan to store. Keep any separately ordered fronts, legs or supports identifiable. If you have a wall-mounted product, share its instructions and check permission to drill beforehand.

Haringey’s parking material identifies more than one Green Lanes zone. Check the information for your street and read the bay signs, including temporary notices. Tell us whether there is an approved place for unloading and where the fitter can park during the appointment. Give the full postcode rather than relying on N15 alone.

If the fitter has to unload at one point and park somewhere else, give both locations. A timed loading bay does not necessarily provide parking while work takes place. Tell us about the entrance, floor and intercom arrangements. If the address is in a managed building, check whether visitor parking is arranged with the manager separately from the street scheme.

Check the box labels before the appointment and tell us if an essential cabinet panel or drawer fitting is missing. Keep any damaged part identifiable and photograph it for the retailer. An independent desk or shelf may still be ready to build. A component from a different model should not be substituted simply because its finish looks similar.

Haringey parking information