Flat Pack MatesFlat pack assembly in Angel
A desk, bed or cabinet can arrive in separate packs even when you bought it as one product. We assemble furniture in Angel and work from the model list, room dimensions and route into the property.
Postcode districts N1
- Desks, beds and storage
- Checks for lifts and managed entrances
- Quote based on your item list
Can you assemble a home office in Angel while I am working?
We can discuss the sequence if you need a desk to stay in use. Tell us when the room can be cleared, what needs to be ready first and where we can lay out the furniture panels. Include the desk model and the floor you are on so we can assess access.
What information helps for a managed building in N1?
Give the full postcode, entrance and reception instructions. Tell us if a service lift or loading space has to be reserved, and whether it is available during assembly as well as unloading. If the cartons are already in the flat, say where they have been left and who can meet the fitter.
Plan a workstation without losing access to the room
Before buying a desk for a study or living area, make a simple floor plan. Mark where the door opens, where a chair has to move and which electrical sockets you use. A return that fits against the wall may still prevent a cupboard from opening. If the desktop has to sit in a bay, measure between the walls at its intended height.
For a corner desk, the left or right return should be described from the position you will sit in, or better still shown on the manufacturer’s drawing. Send the finished width and the separate carton lengths. A monitor arm may need clearance behind the top, while the chair needs enough space to move back. Do not assume a cable tray or screen comes with the desk if the order lists it separately.
Clear the planned assembly surface before the visit. Remove screens, printers and equipment from the existing desk and put them somewhere they can stay until handover. If the old desk has to be dismantled, include it in the list and explain whether the fittings should be kept for reuse. For a room that doubles as a bedroom, confirm which piece can be built without blocking access to the other.
Notes to send with a desk and storage order
- Show which side the desk return goes on.
- List screens, cable trays and pedestals separately.
- Confirm which entrance the fitter should use.
- Give the available lift dimensions and booking window.
| Item | What to include |
|---|---|
| Desk | Model and return orientation |
| Drawer pedestal | Width and the drawer-opening clearance |
| Managed access | Reception contact, lift opening and reserved slot |
Make separate arrangements for unloading and working
Angel station is in N1, but the outward code alone cannot identify your street’s parking arrangements. Use Islington’s address lookup, then check the sign at the bay. If you have a loading entrance, tell us how it is accessed and whether a vehicle can stay there while work takes place. A shared service entrance may need someone to open it.
A space marked for loading may serve a different purpose from a bay in which a fitter can leave the vehicle. Ask the building manager about a timed reservation, a concierge contact and the permitted route into the lift. If the retailer will deliver first, keep that arrangement separate from the fitting visit so there is time to inspect the delivery.
Measure the lift opening and usable depth for your longest pack. A wide corridor at reception does not guarantee an easy turn outside the flat. If cartons are still in a common delivery area, tell us how long they can stay there and how they are marked. Keep shared access and escape routes clear at all times.
Fit the largest furniture first where it affects the layout
Place the desk before setting out smaller units
We check the model and proposed position before laying out the legs and top. If a pedestal or shelf is also going in, check that it leaves room for the chair to move and the drawer to open. Confirm any required wall fixing with the landlord or managing agent before the visit. If the set has several identical cabinets, agree which belongs nearest the door or work surface.
Check all moving parts before putting the room back into use
Open drawers, check the furniture is in its intended position and try the chair adjustments according to the manual. If the desk has a movable top, leave the space needed to test it. Keep instructions and spare components with your order. If part of the job must wait for the retailer, note the model and missing component so a further appointment can be discussed.
| Handover check | What to try |
|---|---|
| Desk | Chair movement and access to sockets |
| Cabinet | Doors and drawers with the desk in position |
| Bed | Storage access with the bedside furniture in place |
Keep flat-pack pieces traceable
Check the delivery against your order. Mark each box with the room and intended item if it is not obvious from the label. Put related fittings together, but leave their labels intact. If two shelving units have the same finish and different widths, use the model references on the boxes to distinguish them. Separate stock that belongs to another order.
A delayed drawer front does not necessarily prevent an independent desk or bed from being built. Check which cartons belong to each product and tell us what is late before the visit. If an essential fixing or panel is absent, keep the article number and a photograph of the label for the retailer. Avoid opening a second product to borrow hardware for the first.
If furniture has already been partly assembled, send a photograph of its current state and the step reached in the manual. Show any holes or fixings that appear damaged. Do not try to force a piece into position before the fitter arrives. Keep any loose hardware in a bag marked with the item reference.
Ask for an estimate from the complete list
Send the models, quantities and location of each item so we can estimate time and staffing. Tell us about a timed goods lift, old furniture to dismantle or an item that must be built first. Confirm the hourly rate and minimum visit before accepting the booking. If your retailer cannot deliver the cartons, ask us about collection as a separate arrangement.
See assembly prices and office furniture assembly. If you need the cartons brought to the property, ask about collection and delivery.
Before you book in Angel
Can the fitter use the goods lift from the car park?
Check the height limit and building rules first. Tell us whether the lift is reserved and which entrance it connects to.
Should I empty the existing desk before it is dismantled?
Yes. Disconnect and remove equipment before the visit, and tell us if you need the desk fittings kept for later.
What if I do not know which side the return goes on?
Send a picture of the room and the model drawing. Agree the orientation before the top and return are fixed together.
Can you build an independent cabinet if the desk pack is delayed?
Send the cabinet reference and check its own packs are complete. We can discuss what can be assembled separately.
Request furniture assembly in Angel
Send the postcode, item list and access notes. We can confirm availability and what the appointment would involve.
Photographs illustrate typical assembly work.